Product Description
Silt Fence consists of a piece of synthetic filter fabric (also called a geotextile) stretched between a series of wooden or metal Fence stakes along a horizontal contour level. The stakes are installed on the downhill side of the fence, and the bottom edge of the fabric can be trenched into the soil and backfilled on the uphill side, although it is quite difficult to move the trenched "spoil" from the downside to the upside of the trench.
The design/placement of the silt fence should create a pooling of runoff, which then allows sedimentation to occur. Water can seep through the silt fence fabric, but the fabric often becomes "blocked off" with fine soil particles (all sediment-retention devices have this challenge, and none of them "filter" storm water for very long). A few hours after a storm event, the fabric can be "disturbed" in order to dislodge the fines, and allow clean water to flow through.
|
| PP 100% cloth and galvanzied wire |
| |
| 12.5gauge, 14gauge, 14.5gauge, 16.5gauge, etc. |
| 24", 36", 48" (2ft, 3ft, 4ft......) |
| 50ft, 100ft, 150ft, 300ft or as required |
| 100% PP geofabric fabric Woven Geotextiles |
| |
| Black or Orange |
| |
| Construction Safety Sediment Control Wire Back Silt Fence |
Packing: Rolling by plastic belt, then bulk packing or on pallet
Accessories: Studded T Post with Post Clips
MOQ: 1x20'GP More Details, please contact with Lynn Wei by sending an enquiry, thank you! Contact us if you need more details on Silt Fence. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wire Backed Silt Fence、Construction Silt Fence. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Fence > silt fence