Welded Gabion box Introduction  

Welded garden Gabion is manufactured from galvanized mild tensile steel wire for a long service life up to 20-30 years .It is so easy to putting together that no need any tools . Spiral joints used to connect adjacent panels and prevent the basket from building. There are circle , rectangular , square , narrow or wide styles to satisfy your various garden designs and welcome for your special drawing or design

Diameter:4mm
Mesh:50mmX100mm; 50mmX50mm
Size:100cmX100cmX100cm; 100cmX50cmX50cm; 100cmX80cmX30cm; 100cmX100cmX30cm
Surface treatment: Hot-dipped galvanized,electric galvanized,galvanized aluminum alloy,etc.
Welded Gabion Cages Install: spring wire


How to install welded Gabion BOX?

Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of Wire Mesh.

Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.

Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and
crimped over the line and cross wires on the front and side faces. None are needed in interior cells.

Step 4. Gabion box filled with graded stone by hand or with a shovel.

Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.

Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the up

Package :
Normally 2 sets/caton